The dirtiest concrete in retail, and the most visible
Surface Pro Power Wash is an exterior cleaning company based in Plano, TX, and fuel sites are some of the hardest-working surfaces it cleans. A gas station forecourt takes what no other retail concrete takes: fuel and oil drips at every dispenser, all day, ground in by tires and baked in by Texas heat. Customers stand directly on that concrete, look at it while they fuel, and judge the store by it before they ever reach the door. More than 20 national brands rely on Surface Pro Power Wash, including ExxonMobil and 7-Eleven, and fuel and convenience sites are where that trust is most visible.
Pump islands: chemistry first, then the clean
The drip zone beside each dispenser is the defining stain of a fuel site, and it does not respond to pressure alone. Fuel and oil residue needs an alkaline degreaser applied and given dwell time, so the chemistry breaks the residue down before the surface cleaner lifts it. Rushing that order just spreads the staining across the forecourt. Older islands where drips have penetrated for years lighten dramatically with proper treatment, with the honest caveat that deep shadows in old concrete may not vanish entirely, and that expectation is set during the site walk rather than after.
Bollards, islands curbs, and the dispenser surrounds are cleaned in the same pass, because a spotless slab beside a grimy bollard reads as half a job.
The canopy is the brand
The canopy fascia carries the site’s colors, lighting, and identity, and it is visible from the road long before the pumps are. Fascia and columns, commonly painted metal or ACM panel, are washed with mild chemistry at pressure that respects the factory finish, because a streaked or chalked fascia panel is more conspicuous than the grime was. The canopy underside collects exhaust film and cobwebs above every fueling position, and it is part of the scope, not an extra.
Where the water goes matters more here
Forecourt wash water can carry fuel and oil residue, and fuel sites are engineered around exactly that risk. Professional cleaning works with the site’s drainage design rather than around it: wash water is controlled and directed appropriately, storm inlets are respected, and degreasing residue is managed rather than flushed. This is the question that separates fuel-site experience from general lot washing, and it is worth asking of any vendor bidding the work.
The whole customer path
A forecourt clean is not complete if the rest of the path lets it down:
- Storefront walkways and aprons, where drink spills and gum concentrate
- The store’s exterior faces and entry, cleaned with method matched to the material
- Dumpster pads and enclosures, degreased on the same rhythm as the islands
- Air, vacuum, and propane station areas
- Drive lanes and the site’s street-facing edges
Built for multi-site operators
Fuel and convenience is a multi-site business, and the cleaning program should behave like one. Each location is scoped on its own terms, sites are sequenced on a predictable rotation, one contact runs the account, and before and after photos land after every visit so a regional or district manager confirms the work from a phone. Surface Pro Power Wash is fully insured, and vendor documentation is provided at onboarding.
Gas station cleaning across Plano and DFW
Surface Pro Power Wash cleans fuel and convenience sites in Plano and across the wider Dallas-Fort Worth metro, including Frisco, McKinney, Allen, Richardson, and Dallas. Larger paved areas are handled with parking lot pressure washing, building faces with building exterior cleaning, and structured parking with parking garage cleaning. To put a site or a route on a schedule, request a free quote.