Skip to content

Residential service

Pool Deck Cleaning

Surface Pro Power Wash provides pool deck cleaning for homes in Plano, TX and across the Dallas-Fort Worth metro. Each deck is cleaned with the method its surface can handle, from soft washing coated cool decks to surface cleaning bare concrete and stone-safe washing for travertine, while rinse water is kept out of the pool. Surface Pro Power Wash is an exterior cleaning company based in Plano, TX.

Cleaned pool deck and spa at a home in McKinney, TX

The hardest-working surface in a Texas backyard

From the spring opening through September, a DFW pool deck takes more barefoot traffic than any other surface at home. It also collects more than any other surface: splash-out, dripped sunscreen, pollen, furniture rust rings, and algae in every shaded corner. That combination matters because a grimy pool deck is not just dull, it is slick exactly where people walk with wet feet. Surface Pro Power Wash is an exterior cleaning company based in Plano, TX, and pool decks are cleaned here the same way as every hard surface: the method is matched to the material, and the pool itself is protected the whole time.

Cool deck coatings are soft washed, never blasted

Many North Texas pool decks wear a cooling textured coating, either genuine Kool Deck, which is a cement-based topping, or an acrylic spray texture that homeowners also call cool deck. Both are thin layers bonded to the concrete slab, and high pressure is the fastest way to ruin them. A pressure wand chips and peels the coating, and water forced under an existing chip lifts it from below. Because repairs rarely match the original color, that damage is effectively permanent. Coated decks are cleaned with the soft wash method instead: the cleaning solution kills the algae and dissolves the sunscreen film, and a low-pressure rinse carries it all away. The chemistry does the work, not the water.

Concrete, exposed aggregate, and stamped decks

Broom-finish concrete is the most pressure-tolerant pool deck surface, and it is cleaned with a rotating flat-surface cleaner for an even, stripe-free finish, the same equipment used in driveway and concrete cleaning. Exposed aggregate needs more restraint. Too much pressure or a close, narrow tip can pop the pebbles loose and strip the sealer, so aggregate is cleaned at controlled pressure with wide, even coverage. Stamped concrete carries its color and sealer right at the surface, where aggressive pressure strips the sealer and blotches the color, so it is cleaned at reduced pressure with the right solution and a lighter touch.

Travertine, flagstone, and pavers

Travertine is calcium carbonate, and acidic cleaners etch it permanently, so it is never treated with acids or high pressure. It gets pH-neutral, stone-safe chemistry and a low-pressure rinse. Texas flagstone is usually a soft sandstone that can flake or spall under concentrated pressure, so the technique is adjusted to the condition of each stone. Paver decks are cleaned with joint-safe pressure so the sand that locks the field together stays where it belongs instead of washing into the pool skimmer.

Protecting the pool while the deck is cleaned

Keeping the deck cleaning out of the pool water is half the job. Work proceeds away from the waterline, rinse water is directed to deck drains or landscaping, and detergents and degreasers never go into the pool, where they would foam and add phosphates that feed algae. Surrounding plants are pre-wet and rinsed.

Stains get their own handling. Rust rings from metal furniture legs are mineral stains that chlorine-based cleaners cannot remove, so they take a dedicated spot treatment that is rinsed thoroughly and kept out of the pool entirely. The white, crusty buildup at splash zones and coping is calcium scale, left behind as hard North Texas tap water splashes out and evaporates through the summer heat. And the brown shadows under leaf piles are tannin stains, which respond to the same cleaning chemistry used on the algae.

Timing helps too. DFW oak pollen falls heavily from late March into early May, coating decks in a film that clogs skimmers and feeds mildew, which makes a pre-season cleaning before the pool opens the natural first visit. Shaded or heavily used decks often benefit from a second pass in late summer to clear a season of sunscreen and regrowth.

Pool deck cleaning across Plano and DFW

Surface Pro Power Wash cleans pool decks in Plano, Frisco, and McKinney, and across the wider Dallas-Fort Worth metro. Covered patios and wood or composite decking are handled with patio and deck cleaning, and the rest of the flatwork with driveway and concrete cleaning. To get the deck ready before the pool opens, request a free quote.

How it works

The process

  1. 01

    Deck inspection

    A technician identifies the deck surface, whether coated cool deck, exposed aggregate, stamped or broom-finish concrete, travertine, flagstone, or pavers, and checks for chips, worn sealer, and loose joints before any water is applied.

  2. 02

    Pre-treatment

    A biodegradable cleaning solution is applied working away from the waterline. The chemistry kills algae and mildew at the root and loosens the sunscreen and body-oil film that plain water cannot lift.

  3. 03

    Cleaning matched to the surface

    Coated decks are soft washed at low pressure, bare concrete and aggregate are cleaned with a flat-surface cleaner at controlled pressure, and natural stone gets stone-safe chemistry with a gentle rinse.

  4. 04

    Rinse and review

    Rinse water is directed to deck drains or landscaping away from the pool, surrounding plants are rinsed clean, and the finished deck is walked and reviewed with the homeowner.

Our work

Recent pool deck cleaning work

Completed jobs across the Dallas-Fort Worth metro. Tap any photo for a closer look.

1 / 1

FAQ

Frequently asked questions

Will pressure washing damage a Cool Deck coating?

Yes, high pressure can chip, peel, and lift cool deck coatings, including genuine Kool Deck and acrylic spray textures, and water driven under an existing chip lifts the coating from below. Repairs rarely match the original color, so coated pool decks are soft washed instead, using a cleaning solution and a low-pressure rinse so the chemistry does the work.

How is a pool deck cleaned without contaminating the pool?

Professional pool deck cleaning works away from the waterline and directs rinse water toward deck drains or landscaping, not into the pool. Detergents and degreasers are kept out of the water because they cause foaming and add phosphates that feed algae. The soft wash solution is in the same chemical family as liquid pool chlorinator, so stray overspray is far less disruptive than soap, though checking the pool chemistry afterward is still good practice.

Why is a pool deck slippery, and does cleaning fix it?

Pool decks turn slick from two layers working together: algae biofilm in shaded, splash-prone areas and the film left behind by sunscreen and body oils. Cleaning that removes both restores traction on steps, tanning ledges, and other wet zones, though no cleaning makes a wet deck slip-proof.

How is calcium scale removed from coping and splash zones?

Calcium scale is a mineral deposit rather than a stain, so cleaning solutions do not dissolve it. On hard, acid-tolerant surfaces a specialty descaler can reduce light scale. On travertine, limestone, and other calcium-based stone the deposit and the stone are chemically similar, so acid attacks both and cannot be used, which means heavy scale on those materials is a specialist descaling job outside routine deck cleaning. Light scale is often reduced during cleaning, while heavy buildup is identified up front rather than promised away.

Does the pool need to be covered or drained before the deck is cleaned?

No. The deck is cleaned with the water kept moving away from the pool, and the work is sequenced so rinse water and any solution run toward deck drains and landscaping rather than the waterline. Draining a pool for deck cleaning is never necessary and can damage a pool structure, so it is not part of the process.

How soon can a pool deck be used after cleaning?

The deck is normally walkable within one to two hours once the surface has dried, and faster in direct summer sun. Furniture is kept off the surface until it is dry so nothing leaves marks or rust rings on freshly cleaned concrete or stone.

Should a pool deck be resealed after cleaning?

It depends on the surface. Cool Deck and similar textured coatings are maintained rather than sealed. Exposed aggregate, stamped concrete, and some natural stone are often sealed, and where that is planned, cleaning is the necessary first step because sealing over organic growth or staining locks it in. Sealing is a separate scope from cleaning and is quoted separately rather than assumed.

What areas does Surface Pro Power Wash serve for pool deck cleaning?

Surface Pro Power Wash provides pool deck cleaning in Plano, TX and across the greater Dallas-Fort Worth metro and Collin County, including Frisco, McKinney, Allen, Richardson, and Dallas.

Free quote

Get a pool deck cleaning quote.

Tell us about the property and the team follows up with a number scoped to your surfaces. No pressure, no obligation, and calling works too.

(214) 764-5913

218 five-star reviews · Fully insured · No obligation

Ready for a cleaner property?

Request a free quote for residential or commercial exterior cleaning anywhere in the Dallas-Fort Worth metro.